How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners must follow a set of steps that are unique to add a second ignition key. This requires the use of a handheld computer, known as Tech-2 which is to be used by the dealer. Then a new key and transponder have to be purchased and then programmed to the car.
It is recommended to rotate your keys so that one does not get damaged faster than the other. This will also keep your keys in top shape.
Replacement Case
The new key fobs for keys are not like the older Saab keys. They're equipped with electronic devices which make it hard to duplicate. This has made stealing cars considerably more difficult than it was twenty years ago. It also makes it more costly to replace keys that were lost.
Saab 9-3 owners must have two working keys. It costs a fortune to replace a lost key because it requires replacing the CIM module, as well as reconfiguring the locking cylinders. Dealers charge between $100-$200 for this.
There are ways to reduce these costs. Certain parts suppliers will utilize the code of the spare key to cut a brand new metal blade for a fraction of the cost of the dealer. The key must be exactly the same as the original for it to work in your vehicle.
You can also replace the case yourself by following these steps. You'll need a flathead screwdriver and some patience. Utilizing the screwdriver, slowly pry the plastic apart and separate the emergency key from the case. Once you have the case open, remove the electronics and put them in the new case. Make sure to insert the correct badge and key back into the case, as well.
Replacement Battery
The replacement battery for the Saab 9-3 is an inexpensive component that can be replaced easily and quickly. This DIY video from YouTube user Cyclone Cyd explains how to replace the battery for the remote key fob in only four steps. This tutorial should work for any modern saab-type key fob, however, the procedure may differ slightly.
This button is usually placed close to the Saab logo on the back of the fob. This is usually located near the Saab logo on the back of the fob. Then use an screwdriver with a flat head to insert into the small hole in this button. This should be enough to open the fob's case so that you can replace the battery.
After you have installed the new batteries CR1632, it is possible to reassemble your remote key fob. Then, you can program it into your car. The entire process should not take more than an hour or less. It's a very easy process that does not require any special equipment.
The procedure is a little more complicated if you've lost your key, but it is possible. The dealer must determine the VIN of the car and then request a replacement key blade and TWICE module that has the exact unique code. The dealer will then need to program the key using MDI an innovative software tool.
Replacement Key Fob
The key fob has a battery that is used to lock and unlock your vehicle. The batteries have a lifespan and will eventually expire. This is a typical issue that occurs with all vehicles and the good thing is that you can replace the batteries in many key fobs and not have to replace the entire case. You can purchase replacement fobs from Amazon that come with all the electronics already installed, so you'll be able to simply open the case and replace the batteries in the original case. You'll need to remove the emergency key before you can replace the batteries. To do this, place a small screwdriver that is flat into the slot in the middle of the. The case will split once you turn the screwdriver around it.
If you're ready to change your keys, be sure to have a spare available. This will save you a significant amount of money. If you have a spare you can ask the dealer cut the new key and program it to your car, which is cheaper than replacing the whole key fob.
saab key fob replacement thekeylab.co.uk is possible to add a second key to your vehicle in the event that you don't have one, but it will require some research and work. The cost for adding a second key is several hundred dollars and it also requires programming of the car's computer. Professionals can do this but it's not a cheap option.
Replacement Ignition
The modern SAAB 9-3 uses an alarm system that is more sophisticated built around a key code. This means that when you lose your sole working key, adding another key can be extremely expensive as the car has to have a special computer module installed, and it also needs to be specifically programmed to accept a new key. Most locksmiths can't do this and dealers will charge hundred dollars to program the new key!
Dealers will charge you a high price to replace your car computer (also called the CIM or SAAB twice) in the event that you lose your sole working key. Instead, we can reprogram the EEPROM of your current car computer, preparing it for a replacement key, and save you over 50% of what you'd be charged at a dealership.
If you've been a long time owner of an 03-11 SAAB 9-3, then you likely have noticed that the ignition switch isn't very robust. They can get extremely sticky and the buttons can fall off of them every now and then, so you should consider getting a replacement if yours isn't performing as it should. It's not as difficult as it seems to replace the ignition key. With the right tools, it can be accomplished quickly.